Whilst this guy doesn’t have any exact plans in relation to building said tube bender form scratch, he does have plenty of pictures, information and is more than happy for you to ask any questions via email.
As he points out:
There are No Plans for this bender, none now, and none later.
I want you to think freely and create.
So off you go to try and cobble one together.
[via]
UPDATE: More about tube bending including various calculators here.
Comments
Randy
on 23/4/2007, 4:40 pm
Can you email me more pic’s of the above tube bender…
Thanks
FAnie
on 19/8/2007, 6:21 pm
Please sent me more pic`s of benders en prices
carl
on 18/9/2007, 7:49 pm
Can you email me pictures of your tube bender?
Thanhs,
Carl
Phil Whitehead
on 30/9/2007, 3:14 pm
Please can you email me more pics of your tube bender
CHRIS IRELAND
on 11/10/2007, 5:01 am
hi. interested in fabricating bender for myself. please send pictures of bender. their may well be a market for this in england. regards. chris.
centeral london. england.
Paul Woodhouse
on 13/10/2007, 6:24 pm
If you just follow the links in the post there are more pictures of the tube bender and instructions on how to make one (I think).
Dennis Walker
on 17/1/2008, 8:43 pm
Could you please send me pictures of your tube bending press
Dennis Walker
on 17/1/2008, 8:47 pm
Can it only bend 45% or can you get other angles from it?
Gerardo E. Suello
on 27/3/2008, 12:05 am
Also interested in making this tube bender. Can you please send more pics. thanks a lot in advance!
Gerardo
Davao City, Philippines
Terry L. Covey
on 22/8/2008, 4:16 pm
Afternoon
starting a trike build and I’m interested in your DIY tubing bender. Please forward and pics or plans you can share. Nice looking assembly. (Vienna, WV)
Joe Mann
on 1/9/2008, 3:31 am
Yes can you send more pictures and the instructions how to build it thank you
dave patmore
on 18/9/2008, 8:48 pm
Yes can you send more pictures and the instructions how to build it thank you
Paul Woodhouse
on 18/9/2008, 10:52 pm
If you follow the link in the post it states on the site that there are no available plans, unfortunately.
You’ll have to get creative.
will
on 15/10/2008, 11:27 am
can you send me more pictures of your bender. i use the old manual bender and yours looks much easier
Vedang R.Desai
on 9/11/2008, 7:26 am
kindly arrange to send us your complete product catalogue along with price-list to this address:Vedang R.Desai,Samarpasn,1st.Floor,Kocher-Street,Valsad-Pardi,Valsad-396001,Gujarat,INDIA,Phone:9879375304
Celt
on 21/11/2008, 1:03 am
Looks similar to the old verticle Carter Sheffield bender?, the bend will always be slightly flat – never perfect. Tube seam will always play a part – wrong way in and it will flatten more, especially with cheap sh** steel stock from India, china, etc. Its still a ardous pump action, limited to minimum 3footish gap (see pic above) ? no matter what – see sense. You can purchase elbow-tee (wider bolted/flush welded) fittings very cheap nowadays (Brundles, Lecky or similar?), far less than the hassle of perfecting a machine as above. No disrepect to the creator at all, very good indeed, tried similar stuff myself and figured out the hours/days/weeks wasted f***in about – cheaper to get done by precise rotary else where. Sorry if I might sound negative, just thinking possitive – of ease and cost!
tony
on 2/5/2009, 8:07 pm
hi im interested in making one for myself. please could you send me as many pictures and information as possible many thanks tony
chris
on 17/5/2009, 8:17 am
can you sent me some pics i want to build one
The only person on here with any intelligence
on 24/6/2009, 1:13 am
Anyone who asks for plans to be sent is a frickin retard. There aren’t any plans; read a little. CLICK THE LINK AND SEE THE PHOTOS!
Peter
on 7/1/2010, 11:18 am
Please email me your email address so I can email you an attachment photo of what i want you to bend.
2.5 inch 304 stainless steel tube.
email peterhospidales2@yahoo.co.uk
Simon Stack
on 7/1/2010, 7:03 pm
Hi love the tube bender would to make one could you please email me the photos
many thanks simon
mark cosgrove
on 2/2/2010, 2:18 pm
please could email more pics
thanks
mark
duh
on 16/3/2010, 2:30 am
this is a protools copy. at protools website they have plans for free