Comments on: Stainless Steel Backsplashes, Plinths and Hobs for the Kitchen http://www.butlersheetmetal.com/tinbasherblog/stainless-steel-backsplashes-plinth-and-hobs_556.html Sun, 05 Sep 2010 18:40:36 +0000 hourly 1 http://wordpress.org/?v=3.0.1 By: Paul Woodhouse http://www.butlersheetmetal.com/tinbasherblog/stainless-steel-backsplashes-plinth-and-hobs_556.html#comment-65144 Paul Woodhouse Wed, 02 Apr 2008 23:03:47 +0000 http://www.butlersheetmetal.com/tinbasherblog/2007/01/31/stainless-steel-backsplashes-plinth-and-hobs/#comment-65144 Apologies for any confusion. Unfortunately, this comments thread was never intended for pricing advice. The reason I originally gave specific instructions to contact John and Matt directly by phone or via the contact page in the post was so they could deal with specific technicalities directly. I don't know whether the problem with the stainless steel plinths would be water running underneath as opposed to being soaked up by the mdf. That's a fitting issue. This is why we ask for drawings. As for fixing, it all depends on what it is being fixed onto. If you could give Matt or John a ring on 01282 870033 then they should be able to answer your questions. I do know you can have them fabricated in brushed satin or polished stainless or a variety of decorative finishes. Obviously they impact the price. And no two prices ever wind up being exactly the same. Apologies for any confusion.

Unfortunately, this comments thread was never intended for pricing advice. The reason I originally gave specific instructions to contact John and Matt directly by phone or via the contact page in the post was so they could deal with specific technicalities directly.

I don’t know whether the problem with the stainless steel plinths would be water running underneath as opposed to being soaked up by the mdf. That’s a fitting issue.

This is why we ask for drawings.

As for fixing, it all depends on what it is being fixed onto.

If you could give Matt or John a ring on 01282 870033 then they should be able to answer your questions.

I do know you can have them fabricated in brushed satin or polished stainless or a variety of decorative finishes.

Obviously they impact the price. And no two prices ever wind up being exactly the same.

]]> By: Simon Chapman http://www.butlersheetmetal.com/tinbasherblog/stainless-steel-backsplashes-plinth-and-hobs_556.html#comment-65143 Simon Chapman Wed, 02 Apr 2008 21:38:07 +0000 http://www.butlersheetmetal.com/tinbasherblog/2007/01/31/stainless-steel-backsplashes-plinth-and-hobs/#comment-65143 I would appreciate some answers to the questions I asked (in December) before I send you drawings. I would appreciate some answers to the questions I asked (in December) before I send you drawings.

]]> By: Paul Woodhouse http://www.butlersheetmetal.com/tinbasherblog/stainless-steel-backsplashes-plinth-and-hobs_556.html#comment-65142 Paul Woodhouse Wed, 02 Apr 2008 21:13:53 +0000 http://www.butlersheetmetal.com/tinbasherblog/2007/01/31/stainless-steel-backsplashes-plinth-and-hobs/#comment-65142 We only fabricate these plinths to custom sizes, so if you have a drawing that you can send to us at sales@butlersheetmetal.com then we'll be able to give you a price. We only fabricate these plinths to custom sizes, so if you have a drawing that you can send to us at sales@butlersheetmetal.com then we’ll be able to give you a price.

]]> By: michelle pearce http://www.butlersheetmetal.com/tinbasherblog/stainless-steel-backsplashes-plinth-and-hobs_556.html#comment-65141 michelle pearce Wed, 02 Apr 2008 17:14:35 +0000 http://www.butlersheetmetal.com/tinbasherblog/2007/01/31/stainless-steel-backsplashes-plinth-and-hobs/#comment-65141 can i have prices for plinths please can i have prices for plinths please

]]> By: Ian Hancocks http://www.butlersheetmetal.com/tinbasherblog/stainless-steel-backsplashes-plinth-and-hobs_556.html#comment-64962 Ian Hancocks Tue, 04 Mar 2008 18:51:22 +0000 http://www.butlersheetmetal.com/tinbasherblog/2007/01/31/stainless-steel-backsplashes-plinth-and-hobs/#comment-64962 I have a finished kitchen but no plinths! The problem is made more tricky by the straight section (approx 4 mtres) containing a pull out drawer (with steps in) and an island unit with some interesting curves in it (therefore needs templating). is this something you could help me with? (p.s. I'm in London!) I have a finished kitchen but no plinths! The problem is made more tricky by the straight section (approx 4 mtres) containing a pull out drawer (with steps in) and an island unit with some interesting curves in it (therefore needs templating). is this something you could help me with? (p.s. I’m in London!)

]]> By: Nicholas K http://www.butlersheetmetal.com/tinbasherblog/stainless-steel-backsplashes-plinth-and-hobs_556.html#comment-64864 Nicholas K Tue, 12 Feb 2008 21:31:32 +0000 http://www.butlersheetmetal.com/tinbasherblog/2007/01/31/stainless-steel-backsplashes-plinth-and-hobs/#comment-64864 Hi Guys Yes me too. I am After SS plinth around 30 meters. Can you give some prices please Hi Guys
Yes me too. I am After SS plinth around 30 meters. Can you give some prices please

]]> By: Simon Chapman http://www.butlersheetmetal.com/tinbasherblog/stainless-steel-backsplashes-plinth-and-hobs_556.html#comment-64465 Simon Chapman Fri, 28 Dec 2007 17:08:38 +0000 http://www.butlersheetmetal.com/tinbasherblog/2007/01/31/stainless-steel-backsplashes-plinth-and-hobs/#comment-64465 Hi - I have just had a new kitchen fitted and realise now that I shouldn't have fitted laminated MDF plinths because there are a couple of places where small amounts of water gather on the slate tiled floor (eg around the dishwasher door) and the plinth just soaks it up causing the laminate to bubble. So... how about stainless steel replacements? The total lineage is 11m and the height is 150mm but there are a couple of 45 degree angles as well as several 90 degree joins and I haven't a clue about making a joint like this in steel. Is it possible? How thick is the steel? I could ask you to make exact lengths (I need 11 separate pieces) but experience tells me that the fitter would anyway have to trim on site so ideally I would have to find a fitter who can work with this material. What is the recommended method of fixing - and can the pieces be removed temporarily if necessary, eg for cleaning or for accessing a leak in the pipes? Finally, do you offer a choice of finishes, eg brushed, matt, glossy? Did I ask how much £££? Many thanks, Simon Hi – I have just had a new kitchen fitted and realise now that I shouldn’t have fitted laminated MDF plinths because there are a couple of places where small amounts of water gather on the slate tiled floor (eg around the dishwasher door) and the plinth just soaks it up causing the laminate to bubble. So… how about stainless steel replacements?

The total lineage is 11m and the height is 150mm but there are a couple of 45 degree angles as well as several 90 degree joins and I haven’t a clue about making a joint like this in steel. Is it possible? How thick is the steel?

I could ask you to make exact lengths (I need 11 separate pieces) but experience tells me that the fitter would anyway have to trim on site so ideally I would have to find a fitter who can work with this material.

What is the recommended method of fixing – and can the pieces be removed temporarily if necessary, eg for cleaning or for accessing a leak in the pipes?

Finally, do you offer a choice of finishes, eg brushed, matt, glossy?

Did I ask how much £££?

Many thanks,

Simon

]]> By: Paul Woodhouse http://www.butlersheetmetal.com/tinbasherblog/stainless-steel-backsplashes-plinth-and-hobs_556.html#comment-63986 Paul Woodhouse Wed, 07 Nov 2007 22:50:01 +0000 http://www.butlersheetmetal.com/tinbasherblog/2007/01/31/stainless-steel-backsplashes-plinth-and-hobs/#comment-63986 Thanks for stopping by, Cathy. I've passed your comment on to the boys back in the UK and they should be in touch fairly shortly. Supplying shouldn't be a problem and I imagine they should be able to cut all your pieces to size if you can provide them. Thanks. Thanks for stopping by, Cathy.

I’ve passed your comment on to the boys back in the UK and they should be in touch fairly shortly.

Supplying shouldn’t be a problem and I imagine they should be able to cut all your pieces to size if you can provide them.

Thanks.

]]> By: Cathy Flaig http://www.butlersheetmetal.com/tinbasherblog/stainless-steel-backsplashes-plinth-and-hobs_556.html#comment-63982 Cathy Flaig Wed, 07 Nov 2007 12:54:02 +0000 http://www.butlersheetmetal.com/tinbasherblog/2007/01/31/stainless-steel-backsplashes-plinth-and-hobs/#comment-63982 I am looking for brushed steel plinth for my kitchen. I need about 7m (by 16cm), longest length about 190cm. Can you supply such a thing? How much would it cost, and is it difficult for a builder to cut and install (with the right tools)? I am looking for brushed steel plinth for my kitchen. I need about 7m (by 16cm), longest length about 190cm. Can you supply such a thing? How much would it cost, and is it difficult for a builder to cut and install (with the right tools)?

]]> By: Emma Curtis-Smith http://www.butlersheetmetal.com/tinbasherblog/stainless-steel-backsplashes-plinth-and-hobs_556.html#comment-63770 Emma Curtis-Smith Sat, 29 Sep 2007 15:52:10 +0000 http://www.butlersheetmetal.com/tinbasherblog/2007/01/31/stainless-steel-backsplashes-plinth-and-hobs/#comment-63770 Hi there I would like to know how much it costs to have steel splashbacks and on the wall around the oven? Does it work out to be cheaper than the cost of tiles/tiling? If someone could contact me ASAP that would be great. thanks. emma Hi there

I would like to know how much it costs to have steel splashbacks and on the wall around the oven? Does it work out to be cheaper than the cost of tiles/tiling?

If someone could contact me ASAP that would be great.

thanks.

emma

]]>